In this video, Scott Stevens from reSAWN TIMBER co. walks us through the Six Square House in Bridgehampton, NY. This 3,500 sq.ft. residence, featuring two bedrooms and three bathrooms, presents a modern interpretation of the area’s conventional barn designs. The home is made of six 24’ x 24’ modules that all feature gabled geometry and a complex-looking roof design that’s shaped like an inverted V. Additionally, this layout capitalizes the surrounding landscape, with each module offering a unique view of the lush property.
Young Projects specified reSAWN TIMBER co.’s IKIGAI FSC®-Certified Accoya wood for the exterior cladding and roofing. The design incorporates an open joint rainscreen to promote ventilation and includes a waterfall edge for effective water drainage. In its entirety, the Six Square House explores gabled geometry, achieving a balanced fusion of symmetry and asymmetry.
Returning to the residence three years later, the exceptional endurance and visual appeal of the IKIGAI cladding made a lasting impression, showcasing its minimal need for maintenance or cleaning.
Accoya® Wood: The Beauty of Wood, Without the Maintenance
reSAWN TIMBER co. is honored and proud to have our IKIGAI Shou Sugi Ban product featured on the exterior of the beautiful Six Square House. The high-performing product aged gracefully after three years of installation and will continue to do so due to Accoya® wood’s extreme durability. We appreciate Young Projects for specifying our product for this project and look forward to continuing our partnership in the future.
IKIGAI – FSC®-Certified, Shou Sugi Ban Accoya® wood can be used for interior or exterior wall cladding. IKIGAI is finished with a dark gray topcoat designed to protect the wall cladding as it naturally weathers over time. reSAWN’s award-winning charring technique adds depth and dimension to Accoya’s natural grain pattern.
Architects and designers can request complimentary Accoya samples to assist in your project decisions.
Hey guys, Scott Stevens here with reSAWN TIMBER co. We’re here in Bridgehampton, NY, looking at the Six Square House designed by Young Projects. This home is 3,500 sq.ft. and sits on about two acres of land. Construction was finished in 2020, and we’re visiting three years later to observe how the wood siding and wood roof cladding have performed and weathered over time.
This project utilizes our IKIGAI product, which is produced on Accoya®. Accoya is an exceptionally high-performing modified wood, backed by a 50-year warranty against rot and decay when used above ground (25 years in ground or freshwater). It also offers remarkable dimensional stability, making it a low-maintenance material for your home and this specific finish. IKIGAI is designed to naturally and consistently weather over time.
For this particular application, the architect designed a two and half inch slat in your more traditional open joint rainscreen. What this rainscreen does is that it separates the siding from the sheathing to promote 360 airflow and rear water drainage. The benefit of that is to allow for the wood to fully breathe and dry out. Which adds to the longevity of the material.
Another interesting detail is that they panelized the installation so they were able to blind fasten from behind and hang the panels on the building to ensure a secure fastening so the wood isn’t moving or going anywhere. If you take a closer look at the wood roof cladding down to the siding, there’s a really nice waterfall edge that allows for actual water to sheath down, but also just a really clean detail well executed by the installer as well to keep those crisp, clean lines that the architect intended.
After three years of weathering, it’s evident that IKIGAI is evolving and weathering as it’s intended to do. Lightening up and fading over time to that really quintessential coastal gray color. Due to Accoya’s modification process, there’s no need to reapply the finish. Although, it is always good to do so. Freshen it up and you can get back to that original day one color over time.
We want to shout out Young Projects for not only specifying our material, but designing such a beautiful project that showcases it along with all the other materials on the project.
If you’re very interested in receiving samples of IKIGAI or any of reSAWN’s other product offerings, feel free to reach out and we’ll connect you with the Specification Consultant in your area to help you select the right product for your project.
Local Project – Architect Designs a Breathtaking Home Connected to Nature
The Local Project offers an in-depth look at the Six Square House, where architect Bryan Young, delves into the project’s initial vision and how it came to life. As a meticulously crafted residence, it serves as a prime example of how an architect achieves a breathtaking home through thoughtful design and execution.
Architecture Hunters – Six Square House: Bridging the Private and Public.
In the interview with Architect Hunter, Architect Bryan Young delves into the intricacies of the Six Square House, examining its adaptable and interconnected spaces. Bryan underscores the significance of wood elements in facilitating both visual and tactile transitions between different areas. The house sparks a broader architectural discourse on evolving dynamics in urban environments, thereby paving the way for innovative architectural explorations.
In this video and article, John Marley from Spire Builders takes us on a tour of the construction process of the Lake Shore Drive Project, an 18,000 sq.ft. home in Delaware County, PA. The Feng-Shui designed home features a sauna, indoor pool, outdoor pool, tennis court, and multiple outdoor spaces for family-gathering.
This modern home features over 3,900 sq. ft. of reSAWN TIMBER co.’s NIGIRI Charred Accoya® exterior cladding. The exterior ceiling cladding displays reSAWN’s LEWIS Western Hemlock. The custom home introduced unique challenges and innovative structures that make this project one of a kind. The home features 40 tons of commercial steel beams to support the main entrance of the home. The framing of the house is supported by a Knightwall system that holds the cladding, the hidden gutters, and the intricate window structures.
Revisiting the residence after three years, the remarkable weathering performance of the NIGIRI cladding leaves an indelible impression of durability and beauty while requiring little to no maintenance or cleaning.
Accoya® Wood: The Beauty of Wood, Without the Maintenance
reSAWN TIMBER co. is honored and proud to have our NIGIRI Shou Sugi Ban product featured on the exterior of the beautiful Lake Shore Drive Project. The high-performing product aged gracefully after three years of installation and will continue to do so due to Accoya® wood’s extreme durability. We appreciate Spire Builders for specifying our product for this project and look forward to continuing our partnership in the future.
NIGIRI – FSC-Certified, Shou Sugi Ban Accoya® wood can be used for interior or exterior wall cladding. NIGIRI is finished with a grey topcoat designed to protect the wall cladding as it naturally weathers over time. reSAWN’s award-winning charring technique adds depth and dimension to Accoya’s natural grain pattern.
Architects and designers can request complimentary Accoya samples to assist in your project decisions.
Hey, I’m John Marley from Spire Builders. I’m here to give you a tour of one of our custom home projects in Delaware County, PA.
This is a large, modern house with about 18,000 sq.ft. of residential space. It’s built with a commercial-grade steel structure, which weighs about 40 tons. The steel structure is a major component of the house, as you can see in the catwalk area. It was important to get the foundation and steel structure as precise as possible, so we used shop drawings to plan everything out in advance.
Once the steel structure was in place, the framers took over. With modern houses, you have to think about every single detail from the framing stage all the way down to the finishing stage, because it could affect things later on.
This house has a lot of challenges that actually make it really unique. For example, we’re building some of the components out of order. We’re installing some of the drywall before we finish other installations. Then, once the drywall is in place, we’re starting on the flooring and trim. This is a bit of a backward way to build, but it’s necessary for this particular house.
All projects start with good drawings and the architect for this project had a very detailed set. We worked out a lot of the details in the mock-up process, but the architect was able to start specifying where he wanted the start corner and other things like that.
We have incorporated a unique and interesting design feature for the window structure. We have cross-section views that provide a detailed look at the construction. In these views, you can see the siding, concealed gutter system, and the Knight Wall system, which plays a vital role in supporting and securing all the elements of the window structure.
Even better, the cross-section views show that the stone and the siding are all in the same plane. This is because the Knight Wall system impacts everything.
We are working with the TBD architects in New York City. You (reSAWN TIMBER co.) introduced them to some of your materials. We narrowed down our choices to the NIGIRI Accoya® Shou Sugi Ban product which presents a dark grey tone and will keep that consistent color throughout its lifetime.
Accoya® wood is a radiata pine that is chemically modified. It is a modified timber in which a process is called acetylation, a cutting-edge patented technology that enables it to resist rot and stays strong for decades. It has a 50-year rot warranty above grade and a 25-year rot warranty at or below grade.
Accoya wood accetylation process
That was a major deciding factor for the client. The client wanted a material that was both low-maintenance and long-lasting. They wanted something that would not require a lot of upkeep, but that would also age and weather gracefully.
The NIGIRI cladding material used is a 1 x 4 board, measuring three and one-half inches in width and three-quarters of an inch in thickness. It features an open-joint design with square corners.
The window jambs run all the way out to the face of the siding material. They are finished on three sides, with the back sides pre-sealed. That extends all the way out to the face, so that way everything is flush.
The window sill has a separate profile that looks very similar. It has a slight pitch and even has a routed groove on the bottom to drain water and moisture away from the sill instead of letting it run back around to the other side of the sill.
We also included an open joint that continues all the way around the window units and in between all the siding.
During the mid-construction phase, you can see where the Knight Wall and window trim have been installed. This process starts at the framing stage, where we used a variety of products, including Green Zip and Benjamin Updike InvisiWrap.
Green Zip is typically used for roof applications, but it can also be used as an exterior weather barrier. However, because the open joint siding cannot rely on this as its facade, we use InvisiWrap, a black wrap that can withstand open joint cladding. InvisiWrap has a 365-day exposure rating and can handle up to two-inch open joint gaps, which is perfectly in line with their warranty. The backside of this product is like a diaper in that it allows moisture to pass through it, but not through the face of it. This means that it acts as an extra raincoat, keeping moisture out while still allowing it to escape.
The next component of this project was the Knight Wall system. I specified this system because I had concerns about the architect’s original plan to use a wood frame structure that would be painted black to hide everything. I was worried about water and rot causing the substructure to fall apart before the siding, which would void the 50-year warranty.
I was able to find a commercial system that is typically used for exterior insulation. This system uses wall clips and long screws to attach the siding system to the frame, which raises the siding off the wall by six inches. This is done for a few reasons, but it is primarily used for exterior insulation.
The rails that we use can be coated with black paint, so we made sure to get them with that coating. This ensures that the silver siding will be visible, and it even has a soft coating to protect projects in coastal environments.
The architect wanted a deeper window jamb, which is why the Knight Wall system was used. This system creates a more visually appealing exterior, and it also allows for a hidden gutter detail and a flush installation with the stonework. The Knight Wall system also helps hide structural components, which makes for a more seamless and aesthetically pleasing finish. It is really unique and it worked out really well for this project.
With the open joint design, a significant amount of flashing is required. Traditionally, regular head flashing is used, but for this project, we opted for a zinc-coated copper flashing instead of the traditional lead-coated copper. We employed a double-head flashing profile, which effectively directs water and any debris away from the house.
To ensure a watertight envelope penetration system, we utilized Quick Flash Units. There are various penetrations, such as outlets, hose bibs, electrical boxes, and even camera wires. The open joint system demands thorough attention to detail; nothing can be overlooked.
The siding material is pre-finished on all sides, but all cuts must be glued and sealed. We use a PPG stain that reSAWN TIMBER recommended, and we apply it with little roller applicators. The cuts are not visible here because they are all butt jointed. However, even butt joints need to be pre-sealed to prevent any issues. I actually tested not sealing the cuts, and it didn’t affect the finish at all. However, we sealed every cut to be on the safe side.
The hidden gutter design was originally introduced to the architect, who drafted the siding and spaced out the gutter detail. It was up to us to make it a reality. The Knight Wall system actually came after the fact, because they had originally drawn a wood framing system that would actually hold the siding. This would have to be black, and there were concerns that it would rot out. We were even going to have to notch out some of the pipes to get them back into the structure. By using the Knight Wall system, we were able to hide a lot of those pipes behind the structure.
Behind this siding piece is the hidden gutter. There is a drop point, and the pipe runs behind the siding system and stubs out to a drain point. We would not be able to do this with a normal system. It is pretty cool that we are able to run the piping behind the rails and hide everything.
The siding material alone is very custom, but one thing that was even more custom was the window jambs. We had everything drawn up and signed off on, and I was even able to provide a profile for the sill. They were able to completely custom-make all of the profiles for us, which was awesome. We would not have been able to achieve the same look without having everything pre-finished to that profile.
We also had very custom exterior doors made at a later date. We milled the raw material to our specifications and then sent it back to reSAWN TIMBER to be finished. This ensured that the doors would match the siding exactly.
The window jamb material had to be specified exactly. The siding system is six inches, and we know that the flanges tend to feather things out a little bit. So I specified the jamb material at five and three-quarters of an inch. This gave us a little bit of flexibility.
So far, we haven’t had to rip any jamb material down. We did order a few extra wide siding boards. In tight little areas, we had to rip it a little bit on site. The edge was then pre-sealed. In certain areas, we might need three and three-quarters or close to four inches. Having those wider boards will actually help resolve those issues.
There are a few different corner details that were done for this project. The architect wanted a simple lap joint, but each corner is being handled a little bit differently.
We measure from ten feet away to ensure that the board lap looks consistent from all angles. For example, we might have to face a board lap forwards or place it on its side, depending on the view. We had to consider the porch area, for instance. They will want to see more of a full board on that side, as opposed to this side, where you can’t see it from here unless you’re 30 feet down below. Even though it’s a simple corner detail, every single corner on the house is thoroughly thought out.
This house has a mixture of cedar and flat roofs structure. The cladding is able to touch grade, but we left a small reveal of about a quarter of an inch along the E-vent’s.
On the side of the house, we’re able to have a drip cap with the gable window. This will allow the siding to tuck up and hide, and be protected.
In areas where we have a flat roof, we’re able to run the siding down. Our deck system ended up butting into that structure and hiding the edge of those boards.
With a 50-year rot warranty, the cladding can touch grade even if it is touching the roof structure. Some materials, like fiber cement siding, require an inch and a half to two inches of exposure to prevent moisture from breaking down the material. However, this material does not require that.
With the 4 x 1 boards, we were able to use a fastener every 24 inches because that is a specification for the Knight Wall. A system like this would typically hold 22 pounds per square foot, and the rails would be spaced 12 inches apart. This is similar to what is required for a stone veneer. However, this system worked better for this project.
We are using a single fine-trim stainless, self-tapping screw for the metal rail system. Even though it is a self-tapper, we are still pre-drilling to prevent the boards from pushing out.
We considered using a Simpson stainless self-drilling trim screw that matches the siding, but the architect was concerned that it would stand out over time. Stainless steel is tried and true, and it looks the same pretty much all year and it has a high resistance to rust.
We use two different sizes of screws for the jambs and the siding. The shorter screw is one inch and a quarter long, and the longer screw is two and a half inches long. The jamb material is one and a half inches thick, and the siding material is three-quarters of an inch thick.
The project started with a mockup. I built the mockup for a couple of reasons. First, I wanted the client to make an informed decision about the products we would use based on their performance and appearance. Second, I wanted to create an instruction booklet for the installation. I took step-by-step pictures of the installation and put them together in a bid packet. This way, all of the subs who were bidding on the project would have the same information. It also helped me to select the right contractor. Some subs turned down the project because it was too much or too involved.
The mockup included reSAWN TIMBER co.’s WABI SABI and NIGIRI exterior siding. We also tried out 1 x 6 and 1 x 4 boards. The client ultimately went with the 1 x 4 boards. The mockup also allowed us to see two different types of stone and the hidden gutter detail.
The mockup has been up for over a year and NIGIRI looks almost exactly the same as it did on day one. The WABI SABI cladding has faded out a bit, which is how it naturally weathers. However, the client preferred the darker tone of NIGIRI and how it stays consistent over time.
The stainless steel fasteners will eventually match the color of the siding, as the siding darkens over time. We used two screws per board in some areas, but with Accoya’s specifications, we can actually use one screw per board. This material has very little expansion or contraction.
The siding was installed with a three-sixteenths of an inch open joint, and remarkably, there has been no movement whatsoever. This speaks to the impressive stability of the material. Even the boards that were left unsealed on the underside remain undamaged, showcasing the remarkable durability of this natural wood material.
Three Years Later
After three years, we revisited this residence with NIGIRI siding, an Accoya® material that’s been charred and stained. The siding has impressively weathered without any signs of wear, and it has demanded no maintenance or cleaning. The most demanding aspect of the project was constructing the garage doors and exterior door. We had to mill the material according to the door specifications before relying on reSAWN TIMBER to finish it flawlessly.
In this video & article, we discuss reSAWN’s Accoya modified wood offering which is prefinished with a waterborne exterior oil. Our one-coat (1C) and two-coat (2C) product offerings provide specifiers with the choice of a more saturated color if desired.
1C Option – Finished with 1 Coat
‘1C’ denotes Accoya wood that is prefinished with one coat of our proprietary exterior oil in the factory. There is no need to apply a second coat of finish post-install.
2C Option – Finished with 2 Coats
‘2C’ denotes Accoya wood that is prefinished with one coat of our proprietary exterior oil in the factory AND will require the installer to apply a second coat of finish post-install. This finish will be included on the sales order and shipped with the materials. Applying a second coat of finish post-install will further saturate the initial color of the cladding and extend the duration of the deeper color.
The video focuses on RAILAY 1C and RAILAY 2C, two of reSAWN’s Accoya wood products with a waterborne exterior oil.
Video Transcript:
Hi, I’m Diane with reSAWN TIMBER, and I’m here today to talk to you about several of our Accoya products that are available with 1C or 2C exterior finish. 1C indicates Accoya is prefinished with one of our exterior oils in the factory, and this does not require a second coat. 2C indicates Accoya is prefinished with one of our exterior oils in the factory, which will require a second coat onsite by the installer.
The big difference between 1C and 2C is the color saturation on day one and as it weathers over time. Applying a second coat of Accoya does enhance the initial color of the exterior cladding and it extends the life of that deeper color over time. However, if you choose not to apply that second coat of finish, that can be a cost savings for your project.
I’m here at the factory in Pennsylvania and we do testing of our own products outside on our weathering rigs. We test for aesthetics and performance. So here are two examples. This is RAILAY 1C and RAILAY 2C – these have been outside on our weathering rigs since September 2021. That is 10 months of accelerated weathering. It’s considered accelerated weathering because it’s on our rigs on a 45 degree angle facing due South.
reSAWN TIMBER co. Accelerated Weathering Rigs
So 10 months of accelerated weathering represents approximately 30 months on the job site. So you can see they are weathering a little bit differently, but yet they’re weathering beautifully. So as you have your project needs or requirements for exterior cladding and Accoya modified products, give us a call at reSAWN TIMBER and we’d be happy to help you out. Thanks!
RAILAY 1C – Day oneRAILAY 2C – Day one
What are the benefits of Accoya wood?
Performance: Tried and tested in the USA. Accoya wood is stable, water and rot-resistant, and comes with a warranty. Accoya wood is thoroughly tested and designed to perform with minimal movement (swell/shrink/distort). Accoya is indigestible by various insects, including termites, resulting in an effective barrier. With a 50-year above-ground and 25-year below-ground and freshwater warranty, Accoya wood can be specified with confidence and enjoyed for decades.
Finish: reSAWN’s carefully crafted Accoya products are thoroughly vetted and tested via reSAWN’s research and development processes to test the aesthetics and performance of the wood in addition to how it weathers. Materials will arrive on-site prefinished, with the option to apply a second coat if desired. Our proprietary finishing process combined with Accoya wood provides a beautiful, low-maintenance exterior siding option.
Sustainability: Sustainability is at the core of Accoya’s business and is part of the entire life cycle of the material, including sourcing, production, and recycling at the end of life. Accoya wood products are FSC® certified, have a low carbon footprint, and are non-toxic to people, pets, and the environment. Accoya wood is the only construction material to achieve Cradle to Cradle Platinum Certification™ for Material Health. Accoya wood siding specifications have a minimal environmental impact.
Sunset Hill featuring reSAWN TIMBER co. NIGIRI and YOSHIMI shou sugi ban charred Accoya
How is Accoya wood modified?
Accoya wood is modified through a process known as acetylation. Accoya takes radiata pine, a softwood, and subjects it to a vinegar known as acetic anhydride. Acetyls are naturally present in wood, and acetic anhydride enhances the hydroxyl groups, providing water-repelling characteristics. This process turns the softwood into a hardwood by preventing the cells in the wood from being able to absorb water. This vinegar is verified as non-toxic with Cradle to Cradle Certified Gold, scoring ‘Platinum’ for Material Health. This modification process gives Accoya its durability and rot and decay resistance.
Accoya wood accetylation process
Does Accoya wood require a lot of maintenance?
Not only is Accoya’s durability proven, but it has also been shown to retain its appearance, requiring much less frequent maintenance than other wood species. Since Accoya wood undergoes the acetylation modification process, it requires little to no maintenance. The modification process enhances the performance of Accoya wood, providing outstanding dimensional stability that results in lower maintenance frequency and therefore less coating over the lifetime of the product.
Accoya wood doesn’t require recoat maintenance. However, if the desire is to get back to that day one color, we do recommend a recoat for aesthetic purposes. Maintenance and recoating guidelines vary by product. Contact reSAWN TIMBER co. for product-specific information.
Samples of our Through Body Color Accoya products are available for architects and designers at no cost and shipped via UPS Ground. Click on the button below to order samples.
In this video & article, reSAWN shows you how to clean & recoat charred exterior siding. The video focuses on IKIGAI which is one of our charred Accoya materials. IKIGAI is first burnt in the Japanese style of shou sugi ban which accentuates the natural grain pattern. It is then brushed to remove most of the charcoal layer and finished with an exterior oil top coat.
Video Transcript: Hi, this is Ryan with reSAWN TIMBER co. ‘s R+D Department.
Today we’re going to be showing you how to clean an exterior cladding product in preparation for a recoat.
Keep in mind, that Accoya is a modified wood and doesn’t require recoat maintenance. However, if the desire is to get back to that day one color, we do recommend a recoat for aesthetic purposes.
So the first step in this process is knowing when your cladding was installed. So we know – our test board for IKIGAI has been out on our testing rigs. We know this was put outside 3 years ago (1 year of weathering = 3 years of accelerated weathering). So, that falls in the 3-4 year window of when we recommend recoats.
reSAWN TIMBER co. Weathering Rigs
Accelerated Weathering Correlation
Accelerated weathering means exposure of our products facing South on a 45-degree angle. One year of accelerated weathering equals approximately three years of natural weathering.
Visual Inspection of Cladding
The next step would be to visually inspect the product for any kind of damage, fading, mold – things like that. And after taking a look at this, and knowing how long it’s been outside, we’ve decided to do a recoat on this product.
This product here is IKIGAI. This is a shou sugi ban product or a charred Accoya product.
And I think after we clean it and prep it and we get the finish on there, it’ll look just as good as the day it got installed*. So, let’s do that.
NOTE*: Maintenance and recoating guidelines vary by product. Contact reSAWN TIMBER co. for product-specific information.
IKIGAI Accoya – Before Cleaning & RecoatVisual Inspection of Exterior Cladding
Part 1 – Cleaning IKIGAI Accoya Exterior Wood Cladding
Step One – dampen the surface with water, using a garden hose if possible.
Step Two – apply reSAWN’s ready-to-use exterior wood cleaner using a soft-bristled brush.
NOTE: For lighter cleaning, the product can be diluted with water at a ratio of 1:2.
Step Three – scrub the treated area with a soft-bristled brush. That’s a nice soft-bristled brush. Working lengthwise along the wood until it is clean. For stubborn stains, repeating the treatment may be necessary.
Step Four – rinse thoroughly with water until all of the foam has been washed away.
Let the wood dry for a minimum of 24 hours before starting the recoat process.
Part 2 (Optional) – Recoating IKIGAI Accoya Exterior Wood Cladding
Step One – stir the oil finish provided by reSAWN thoroughly before use.
Step Two – once the clean surface is dry, apply a layer of oil finish supplied by reSAWN with a foam pad. Work length-wise across the boards. Maintain a wet edge to prevent any lap marks.
Step Three – wait for 1 to 3 minutes, allowing oil to penetrate. Then buff off traces of excess product with a piece of cloth.
Step Four – Let the surface dry for about 24 hours.
IKIGAI Accoya – AFTER Cleaning & Recoat
NOTE: Complete curing takes place after 7 days.
Cloths that are soaked in oil may spontaneously combust, and must therefore be submerged in water after use.
Accelerated Weather Testing at reSAWN TIMBER co.
At reSAWN, our Research & Development department ensures the quality assurance necessary to specify our exterior cladding products with confidence. Testing begins at the conception of a new product by placing the product on our accelerated weathering rigs. Our R & D team studies the finish performance and quality and structural performance of each product.
Accelerated Weathering is done at our facility in Telford, PA. Telford is located in the southeastern part of Pennsylvania in the Northeastern United States in the humid continental climate zone, with some characteristics of the humid subtropical climate that lies in Delaware and Maryland to the south. A humid continental climate is a climatic region typified by large seasonal temperature differences, with warm to hot (and often humid) summers and cold (sometimes severely cold in the northern areas) winters. Precipitation is usually distributed throughout the year. Telford experiences average temperatures of 25 °F to 45 °F in the winter and 65 °F to 85 °F in the summer. The average precipitation per month is around 3.5 inches with an average yearly precipitation of 41 inches. The average relative humidity for the year is 65%. The average UV index ranges from low-moderate in the winter (2-5) to high-very high in the summer (8-9).
Accelerated Weather Testing at reSAWN TIMBER co.
Materials are installed facing due South with approx. 8 hours of direct sunlight per day at a 45-degree angle to accelerate weathering. The actual weathering appearance and time frame at your site will be different depending on several factors including climate, altitude, and facing. In general, the acceleration factor is roughly 3:1 and so for example, 1 year of accelerated weather testing can be correlated to roughly 3 years of natural weathering. However, taking into consideration the usual high variation of test results obtained with wood samples and the variations in climate zones, facings, and weather — it is impossible to make an exact correlation to the time associated with weathering at your site.
[3:1 has to be qualified as it relates to the material being installed as vertical cladding in a Southern exposure in the Northern Hemisphere. 3-5 Years for Northern exposure. In both conditions, this assumes full UV Exposure. Cladding blocked by UV exposure will alter these estimated time frames. If reSAWN material is used as roof cladding (specifically 12:12 pitch) it’s a 1:1 correlation.]
At reSAWN TIMBER co. we celebrate and visually leverage wood’s inherent tendency to weather over time by designing modern, high-performance products that are meant to age in place with grace.
Six Square House, Bridgehampton, NY – IKIGAI Shou Sugi Ban
We work with woods’ natural tendency to grey, not against it. Our products look beautiful on day one and continue to as nature takes over. Each board works cohesively together yet each board has its own visual story. The result is modern originality & inherent textural beauty with each and every project.
We are excited to share that a project featuring reSAWN TIMBER co.’s NIGIRI shou sugi ban charred Accoya® wood won an award at ULI Baltimore’s Annual WaveMaker Awards.
ULI Baltimore’s annual WaveMaker Awards recognize outstanding local real estate development projects, as well as Lifetime Achievement and Leadership Award winners. The winning projects were selected based on the following criteria: Completeness; a Sense of Place and Quality; Sustainability; Visionary and Emulation; and a Need.
reSAWN is humbled to share that PI.KL architecture design studio in Baltimore Maryland chose our custom shou sugi ban charred Accoya® on their Broadway Market project.
2019 AIA Excellence in Design Awards
Broadway Market was recognized with two awards at the 2019 AIA Baltimore Excellence in Design Awards:
AIA Baltimore Excellence in Design Award Honorable Mention
AIA Baltimore Good Design = Good Business Award
It was included amongst so many deserving projects of all scales. We’re so happy to be a part of such an important community revitalization.
“The design team did a fantastic job updating the 200-year-old market to better support business and the community. They showed great attention to detail—the doorways are amazing. You can tell a lot of care went into restoring the market. The jury was impressed with the take on the “black box”—by providing a layer of glass between the box and the facade of the brick structure, the design acknowledges the history of the building and the woodshed structure. The jury appreciated how the shou sugi ban treatment draws the user to see the difference between old and new”. – AIA Baltimore
reSAWN’s custom shou sugi ban charred cypress is featured on the cover of the August 2019 Hamptons Cottages & Gardens Architecture issue. Similar in color and tone to our MURASAKI – this custom finish was designed by reSAWN specifically for this project. The blue/grey hue of this finish compliments the wood and will age gracefully in place. Burning helps to accentuate the natural grain pattern of the cypress and adds visual depth to the wood cladding.
“All exterior materials, from reSAWN’s custom shou sugi ban charred cypress to raw concrete walls, to the zinc roof, were chosen for their ability to weather and patina gracefully, naturally over time.” — Architect Maziar Behrooz (read the full article here)
MB Architecture chose to carry our custom shou sugi ban charred cypress throughout the interior of the home as well. They also incorporated our GOVERNOR European white oak flooring and custom North American white oak ceiling cladding.
In partnership with a local builder and interior designers, Philadelphia magazine creates Design Home, an extraordinary showcase of craftsmanship, architecture, and design. With a new location each year, the project brings something new to the regional home market. The home is open for 3 weeks with tours and special events that allow you to admire the details which will leave you feeling inspired. We invite you to tour this exceptional home where modern design meets traditional living.
Now in its 16th year, the Philadelphia Magazine Design Home is always an extraordinary example of luxury living in the Philadelphia region. Doors open to the public starting October 12th, with all ticket proceeds benefitting MANNA (Metropolitan Area Neighborhood Nutrition Alliance).
reSAWN TIMBER co. chose Western Hemlock for interior applications due to its impeccably straight uniform grain structure, fine texture and its creamy white to light gold color, which lends itself to a modern clean aesthetic.
Western Hemlock is typically found on the Pacific North West coast of North America and is one of the most valuable sources of lumber in the northern hemisphere and is the largest of the hemlock species. Specimens range from 90 to 150 feet tall and 3 to 4.5 feet wide, though some specimens have been known to grow to heights of 250 feet and diameters approaching 9 feet. The wood is usually odorless when dry and free of resin.
reSAWN’s Western Hemlock offering includes three CHARRED shou sugi ban designs — KITSAP, YAKIMA and KITTITAS — and six designs that are non-CHARRED — MASON, GRAYS HARBOR, LEWIS, SNOHOMISH, OKANOGAN, and WHITMAN. All nine products are available for sampling and specification.
In an article published in The Washingtonian, an office space located in Washington DC was featured, highlighting the use of reSAWN’s MONOGATARI shou sugi ban charred cypress. Located in Southeastern Washington DC, this newly built structure serves as an office for DC-based architecture firm, bld.us. bld.us chose reSAWN’s MONOGATARI shou sugi ban charred cypress for the exterior cladding.
